无人机倾斜摄影支持下的1∶500高精度三维测图方案及应用     

赵小阳  孙松梅 《测绘通报》2019,(7):87-91

研发了一种适合于大范围1∶500的无人机测图方案，围绕平面和高程点位中误差在5 cm以内这一核心目标，从无人机的平台稳定性、空中精准定位飞控、空三与三维建模及模型与影像结合的多视角测图等方面进行了设计。在广州马沥村的应用表明，本文研究的无人机倾斜摄影方案可以满足1∶500高精度的三维测图，并具有较高的效率。  相似文献   

空间波数混合域磁异常场积分解三维数值模拟          下载免费PDF全文

李昆  戴世坤  陈轻蕊  张钱江  赵东东  王顺国  凌嘉宣 《地球物理学报》2019,62(11):4437-4450

本文提出一种空间波数混合域磁异常场三维数值模拟方法.该方法利用磁位三维空间域积分为卷积的特点，沿水平方向进行二维傅里叶变换，把空间域磁位满足的三维积分问题转化为不同波数之间相互独立的垂向一维积分问题.保留垂向为空间域，优势之一在于便于浅层单元剖分可适当加密，随着深度增加，单元剖分适当稀疏，可以准确模拟任意复杂地形和磁性体的磁异常，兼顾了计算精度与计算效率；优势之二在于一维积分垂向可离散为多个单元积分之和，每个单元采用二次形函数表征磁化强度，可得出单元积分的解析表达式，计算精度高、效率高.该方法充分利用一维形函数积分的高效和高精度、快速傅里叶变换的高效性及算法高度并行性，实现了磁异常场高效、高精度的数值模拟.设计棱柱体模型，将模型解析解与空间波数混合域法的数值解对比，结果表明该方法计算精度高、效率高.设计了组合棱柱体复杂模型，对比分析了标准FFT扩边法与Gauss-FFT法的计算精度与计算效率，总结了标准FFT的扩边系数选取策略.针对任意复杂地形条件下的磁异常模拟问题，本文提出一种适用于起伏地形条件下的磁异常场快速计算方法，并对其有效性进行了验证.  相似文献   

Response and capacity of monopod caisson foundation under eccentric lateral loads     

Tanmoy Kumar Deb  Baleshwar Singh 《Marine Georesources & Geotechnology》2018,36(4):452-464

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.  相似文献   

Upper Ocean Four-Dimensional Variational Data Assimilation in the Arabian Sea and Bay of Bengal     

Suneet Dwivedi  Atul Srivastava  Alok Kumar Mishra 《Marine Geodesy》2018,41(3):230-257

A regional ocean circulation model with four-dimensional variational data assimilation scheme is configured to study the ocean state of the Indian Ocean region (65°E–95°E; 5°N–20°N) covering the Arabian Sea (AS) and Bay of Bengal (BoB). The state estimation setup uses 10 km horizontal resolution and 5 m vertical resolution in the upper ocean. The in-situ temperature and salinity, satellite-derived observations of sea surface height, and blended (in-situ and satellite-derived) observations of sea surface temperature alongwith their associated uncertainties are used for data assimilation with the regionally configured ocean model. The ocean state estimation is carried out for 61 days (1 June to 31 July 2013). The assimilated fields are closer to observations compared to other global state estimates. The mixed layer depth (MLD) of the region shows deepening during the period of assimilation with AS showing higher MLD compared to the BoB. An empirical forecast equation is derived for the prediction of MLD using the air–sea forcing variables as predictors. The surface and sub-surface (50 m) heat and salt budget tendencies of the region are also investigated. It is found that at the sub-surface, only the advection and diffusion temperature and salt tendencies are important.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

A one‐dimensional process‐based approach to study reservoir sediment dynamics during management operations          下载免费PDF全文

Lucie Guertault  Benoit Camenen  André Paquier  Christophe Peteuil 《地球表面变化过程与地形》2018,43(2):373-386

A comprehensive understanding of the dynamics of erosion and sedimentation in reservoirs under different management conditions is required to anticipate sedimentation issues and implement effective sediment management strategies. This paper describes a unique approach combining fluvial geomorphology tools and morphodynamic modeling for analyzing the sediment dynamics of an elongated hydropower reservoir subjected to management operations: the Génissiat Reservoir on the Rhône River. Functional sub‐reaches representative of the reservoir morphodynamics were delineated by adapting natural river segmentation methods to elongated reservoirs. The segmentation revealed the link between the spatial and temporal reservoir changes and the variability of longitudinal flow conditions during reservoir management operations. An innovative modeling strategy, incorporating the reservoir segmentation into two sediment transport codes, was implemented to simulate the dynamics of erosion and sedimentation at the reach scale during historic events. One code used a bedload approach, based on the Exner equation with a transport capacity formula, and the other used a suspended load approach based on the advection–dispersion equation. This strategy provided a fair quantification of the dynamics of erosion and sedimentation at the reach scale during different management operations. This study showed that the reservoir morphodynamics is controlled by bedload transport in upper reaches, graded suspended load transport of sand in middle reaches and suspended load transport of fine sediments in lower reaches. Eventually, it allowed a better understanding of the impact of dam management on sediment dynamics. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

基于交错网格有限差分法的断面波叠前时间偏移成像影响因素正演分析          下载免费PDF全文

徐嘉亮  周东红  王玉英  边立恩  吕振宇 《地球物理学报》2018,61(2):733-741

断层和断裂带的有效识别是地震资料解释中的重要环节，断层在地震信号响应中以断面波的形式体现，因此断面波成像的质量关系到断层的精细识别与刻画.本文利用精度较高的交错网格有限差分正演模拟方法对断面波成像的影响因素进行了正演研究，主要正演分析的参数包括采集因素中的电缆长度和采集方向，地质因素中的断层倾角、断距、反射系数，以及处理因素中的偏移方法等几个方面.通过正演论证得出：采用合理的采集参数能够提高断面波的照明度；有效结合地质因素能够提高断面波的解释精度；利用合理的偏移方法能够使断层归位更加准确，断面波有效成像.基于以上结论，对于断面波的精确识别与刻画，应综合采集因素，处理因素及地质因素，只有这样才能提高断层的解释精度，有效减小解释误差.  相似文献   

基于广义旋转法双九点格式标量波方程数值模拟   总被引：1，自引：1，他引：0       下载免费PDF全文

黎昌成  张美根 《地球物理学报》2018,61(3):1178-1187

前人虽然基于传统旋转法提出了四阶精度最优17点差分格式，用于提高频率域地震波场数值模拟精度，但其仅适用于等网格间距的情形.这大大限制了该格式的使用范围.为了进一步提高17点有限差分格式的数值精度并将其推广到矩形网格，本文基于二阶精度有限差分算子利用广义旋转法提出了双九点格式，由于其差分格点与前人17点格式在分布上一样，所以也可称为二阶精度最优17点格式，但由差分格式构造原理上来讲，称其为双九点格式更妥.前人四阶精度17点格式仅为本文等网格间距情形时的特殊情况，本文方法单位波长网格点数仅需要2.2个即可.本文格式在继承传统旋转法良好几何旋转性质的同时，拥有平均导数方法适用于矩形网格的特点，和平均导数法所得的广义17点格式相比，本文格式数值精度更高，数值频散抑制性能和差分算子对称性更好.同时，本文双九点格式方法和思想对于后人借助传统九点格式的构造方法将其扩展到17点格式求解各类波动方程具有十分重要的意义.  相似文献   

“数字海底”--海底数据集成管理与可视化研究     

肖鹏  王悦东  李安龙 《海洋信息》2020,35(1):40-45,51

针对目前"数字海底"建设中存在海底调查数据集成管理与三维可视化表达不足等问题,本文采用GIS技术,以黄河水下三角洲埕北海域为研究对象,利用地理空间数据集成理论与三维建模方法,建立了埕北海域三维海底空间数据库,实现了研究区域地形数据、地层数据、钻孔数据、表层沉积物数据的有效组织管理与可视化,并在此基础上,采用ArcGIS Engine 10.0,结合.NET平台,在Visual Studio 2010开发环境下,利用C#语言进行了二次开发,实现了基于C/S (Client/Server)架构的三维海底虚拟仿真系统的开发,设计了一套面向埕北海域的三维海底虚拟仿真原型系统。  相似文献   

徕卡三维激光扫描系统在建筑物精细建模中的应用   总被引：2，自引：0，他引：2  

朱曙光  何宽  周建郑 《测绘通报》2018,(2):154-156

三维激光扫描技术作为一种新的测绘技术手段改变了传统的测量模式,利用三维激光扫描技术可以快速、高效、连续地获取海量的点云数据,通过处理可以快速得到被测目标的三维模型。本文主要结合徕卡Scan Station P40三维激光扫描系统介绍其在复杂建筑物精细建模中的应用,通过对点云数据及建模精度分析,得出了有益的结论。  相似文献